ETO membrane is used to remove dissolved oxygen in
water. It is operated in three modes according to different deoxygenation
efficiency: vacuum, nitrogen sweep, vacuum + nitrogen sweep. Product water
oxygen content can be decreased to 3ppb.
membrane contactor is a kind of special hydrophobic
hollow fiber array made of polymer material. Then the array is spiral-wounded
onto a water distribution tube, and then the tube is installed into a housing
(at the same time, a baffler is formulated inside the housing).
Hollow fiber → Knitted fiber (under microscope) →
Knitted fiber (naked eyes) → End surface
Structure
of membrane contactor:
Features of
membrane contactor:
1) Hollow
fibers are knitted into an array, so that a certain space can be kept between
these fibers. In this way, thousands of fibers are connected as a whole array
which can resist strong water flow and will not break. Besides, the mass
transfer efficiency can be improved in the array structure.
2) High fiber
density makes it possible of ultimate gas removal from water;
3) Central
tube water distribution + Middle baffler structure, change the water flow
direction to flush vertically towards hollow fibers, which can improve the mass
transfer efficiency between shell side and lumen side.
In many industrial processes, dissolved oxygen in
water has negative influence: corrosion to many materials. It may cause
corrosion to pipes, boiler and other related equipments. Membrane contactor
system is modular designed, easy to operate, no need of chemical. Compared with
vacuum tower and other technology, it has smaller footprint but higher
efficiency!
membrane contactor can be used for deoxygenation in
boiler feed water, semi-conductor and flat plate/TFT process ultra pure water
(to prevent crystal plate bending), food & beverage process water, chemical
industry process water, oil field reinjection water.
According to different deoxygenation
efficiency, membrane contactor is
usually operated in the following modes: vacuum, nitrogen sweep, vacuum +
nitrogen sweep. Product water oxygen content can be decreased to 3ppb.
·
Specifications
of ETO membrane contactor:
Item
Parameters
Model
ETO-6×28
ETO-10×28
Application
O2 removal
from pure water
Flux
1~6m3/h
6~15m3/h
Fiber
material
Polypropylene
Dimensions
Ø6×28 inch
Ø10×28 inch
Liquid/gas
contact area
45m2
120m2
Inner/outer
diameter of fiber
0.2/0.3mm
Housing
material
UPVC
PH
resistance range
1~13
Working
temperature
5~45℃
Max
inlet water pressure
6.0bar
Connect
pipe size
DN32
/ DN20
DN40
/ DN20
Contact:Tel:+86 592 6514970Skype:18060902001WhatsApp:18060902001WeChat:18060902001TM: guochukejiQQ:1641011431
- Product Details
- Brand :
- Place of Origin : FUJIAN
- FOB Price : On Request
- Minimum Order Quantity : Not Given
- Supply Ability :
- Packaging & Delivery
- Packaging Detail : Not Given
- Delivery Detail : Not Given
ETO membrane is used to remove dissolved oxygen in water. It is operated in three modes according to different deoxygenation efficiency: vacuum, nitrogen sweep, vacuum + nitrogen sweep. Product water oxygen content can be decreased to 3ppb.membrane contactor is a kind of special hydrophobic hollow fiber array made of polymer material. Then the array is spiral-wounded onto a water distribution tube, and then the tube is installed into a housing (at the same time, a baffler is formulated inside the housing). Hollow fiber → Knitted fiber (under microscope) → Knitted fiber (naked eyes) → End surface Structure of membrane contactor: Features of membrane contactor:1) Hollow fibers are knitted into an array, so that a certain space can be kept between these fibers. In this way, thousands of fibers are connected as a whole array which can resist strong water flow and will not break. Besides, the mass transfer efficiency can be improved in the array structure.2) High fiber density makes it possible of ultimate gas removal from water;3) Central tube water distribution + Middle baffler structure, change the water flow direction to flush vertically towards hollow fibers, which can improve the mass transfer efficiency between shell side and lumen side.In many industrial processes, dissolved oxygen in water has negative influence: corrosion to many materials. It may cause corrosion to pipes, boiler and other related equipments. Membrane contactor system is modular designed, easy to operate, no need of chemical. Compared with vacuum tower and other technology, it has smaller footprint but higher efficiency!membrane contactor can be used for deoxygenation in boiler feed water, semi-conductor and flat plate/TFT process ultra pure water (to prevent crystal plate bending), food & beverage process water, chemical industry process water, oil field reinjection water.According to different deoxygenation efficiency, membrane contactor is usually operated in the following modes: vacuum, nitrogen sweep, vacuum + nitrogen sweep. Product water oxygen content can be decreased to 3ppb.· Specifications of ETO membrane contactor:ItemParametersModelETO-6×28ETO-10×28ApplicationO2 removal from pure waterFlux1~6m3/h6~15m3/hFiber materialPolypropyleneDimensionsØ6×28 inchØ10×28 inchLiquid/gas contact area45m2120m2Inner/outer diameter of fiber0.2/0.3mmHousing materialUPVCPH resistance range1~13Working temperature5~45℃Max inlet water pressure6.0barConnect pipe sizeDN32 / DN20DN40 / DN20Contact:Tel:+86 592 6514970Skype:18060902001WhatsApp:18060902001WeChat:18060902001TM: guochukejiQQ:1641011431